Riviera V6-3.8L SC VIN 1 (1995)
2.
Install the seat heat element (Park Avenue Ultra shown).
^
Remove the paper from the tape that is located on the back of the heat element.
^
Carefully position and press the heat element (7) onto the seat cushion pad (8).
^
Tuck the narrow connecting strips into the seat cushion pad trenches.
3.
Insert the seat heat element harness (9) through a hole located in the right rear corner of the seat cushion pad (10).
4.
Connect the seat heat element BLACK electrical connector to the Heat Module BLACK electrical connector.
