Riviera V6-3.8L SC VIN 1 (1995)
the Seal from the compressor with a rotary-pulling motion. Discard the seal. The handle must be hand- tightened securely. Do not use a wrench or
pliers.
Removing And Installing Shaft Seal And O-Ring
7. Remove and discard the seal seat O-ring from the compressor neck using O-ring remover J 955301, illustration.
8. Recheck the shaft and inside of the compressor neck for dirt or foreign material and be sure these areas are perfectly clean before installing new
parts.
Clean
^
Thoroughly clean O-ring seal groove in front head.
