Riviera V6-3.8L SC VIN 1 (1995)
Air Dryer: Service and Repair
CAUTION: When repair or adjustment procedures require that vehicle be raised on a hoist, it is important that the rear axle assembly
remains in the normal trim height position at all times. When a frame contact hoist is used, two additional jack stands should be used to
support the rear axle or control arms in the normal trim height position.
Fig. 23 Air Dryer Assembly
1.
Remove compressor as described in Shield, Compressor & Bracket. See: Compressor/Pump/Service and Repair/Shield, Compressor & Bracket
2.
Rotate dryer retainer spring 90° and pull dryer and O-ring out of compressor head assembly, Fig. 23.
3.
Reverse procedure to install.
