Skylark V6-3100 3.1L VIN M SFI (1996)
available accessory circuit (or ignition circuit not powered during engine cranking).
3.
It is recommended that the handset or control unit positive and negative power leads be appropriately fused separately from the transceiver
positive and negative power leads.
d.
Multiple Transceivers or Receivers
If multiple transceivers or receivers are to be installed in the vehicle, power leads to the trunk or under the dash should be connected to
covered, insulated terminal strips.
All transceivers or receivers may then have their power leads connected to the insulated terminal strips. This makes a neater installation and
reduces the number of wires running to the vehicle underhood area.
Both positive and negative power leads should be fused.
