Skylark V6-3100 3.1L VIN M SFI (1996)
Rear Door Outside Handle
Remove or Disconnect
1. Raise window to the full up position.
2. Door trim panel.
3. Seat belt retractor.
4. Enough door water deflector to access door outside handle and lock cylinder.
5. Lower window run channel.
6. Door outside handle and lock cylinder bolts.
7. Door outside handle and lock cylinder rods from door outside handle.
8. Door outside handle.
9. Door lock cylinder nut.
10. Door lock cylinder from door outside handle.
Install or Connect
1. Door lock cylinder to door outside handle.
2. Door lock cylinder nut.
Tighten
^
Nut to 6 N.m (53 lb in).
3. Door outside handle and lock cylinder rods to door outside handle.
4. Door outside handle and lock cylinder bolts.
Tighten
^
Bolts to 6 N.m (53 lb in).
5. Lower window run channel.
6. Door water deflector.
7. Seat belt retractor.
8. Door trim panel.
Adjust
^
When outside door handle is in closed position, insert lower end of lock rod into retainer on lock and close retainer.
Inspect
^
Door lock system for proper operation.
