Skylark V6-3100 3.1L VIN M SFI (1996)
ASSEMBLE
1. Motor pack to hydraulic modulator, reposition brake pipes.
IMPORTANT
^
Take care in handling the motor pack. If dropped or damaged during handling the motor pack must be replaced.
^
Align each of the three motor pack pinions with the hydraulic modulator gears.
2. Four Torx head screws.
TIGHTEN
^
Torx head screws to 5 Nm (44 lb. in.).
3. Gear cover to hydraulic modulator/master cylinder assembly.
4. Torx head screws attaching gear cover.
TIGHTEN
^
Torx bolts to 4 Nm (36 lb. in.).
5. Connect motor pack electrical connector.
6. Install air box assembly.
7. Clip to engine compartment fuse/relay center.
8. Battery to vehicle.
9. Air cleaner duct clamps and electrical connections.
10. Using Tech 1, perform "rehome" procedure.