buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

01-06-01-010B|Page 3505 > < 01-06-01-010B|Page 3502
Page 1
background image

Piston: All Technical Service Bulletins
Engine - Polymer Coated Service Pistons

File In Section: 06 - Engine/Propulsion System

Bulletin No.: 01-06-01-010B

Date: February, 2003

INFORMATION

Subject:
Polymer Service Pistons

Models:
1996 Buick Regal
1996-98 Buick Skylark
1996-99 Buick Century
1996 Chevrolet Beretta, Corsica
1996-99 Chevrolet Lumina, Monte Carlo
1997-99 Chevrolet Malibu
1996-98 Oldsmobile Achieva
1997-99 Oldsmobile Cutlass
1996-98 Pontiac Grand Am
1996-99 Pontiac Grand Prix
with 3.1 L Engine (VIN M - RPO L82)

This bulletin is being revised to clarify the models and parts information. Please discard Corporate Bulletin Number 01-06-01-O1OA (Section 06 -
Engine). 

A service piston with a polymer coated piston skirt is available for the above engine. Polymer pistons should be used in these applications any time
piston replacement is necessary.

Notice

Do not install pistons in model years other than listed in the parts table below. Damage to the piston, cylinder block or cylinder head may occur if the
wrong piston is installed.

Refer to Corporate Service Bulletin Number 01-06-01-002 for revised piston pin installation procedure.

Parts Information

Parts are currently available from GMSPO.

Disclaimer

01-06-01-010B|Page 3505 > < 01-06-01-010B|Page 3502