Skylark V6-3100 3.1L VIN M SFI (1996)
Drive Belt Tensioner: Service and Repair
Removal Procedure
Tools Required
J 39914 Drive Belt Tension Wrench
1. Disconnect the negative battery cable.
Caution: Unless directed otherwise, the ignition and start switch must be in the OFF or LOCK position, and all electrical loads must be OFF
before servicing any electrical component. Disconnect the negative battery cable to prevent an electrical spark should a tool or equipment come in
contact with an exposed electrical terminal. Failure to follow these precautions may result in personal injury and/or damage to the vehicle or its
components.
2. Rotate the drive belt tensioner. Use the J 39914.