Skylark V6-3100 3.1L VIN M SFI (1996)
3. Hold the sprocket with the chain hanging down and align the marks on the camshaft and crankshaft sprockets.
4. Align dowel in camshaft with dowel hole in camshaft sprocket.
5. Draw the camshaft sprocket onto camshaft using the mounting bolts.
Tighten
^
Camshaft sprocket mounting bolts to 100 Nm (74 lbs. ft.).
6. Lubricate timing chain with engine oil.
7. Crankcase front cover.
8. Fill cooling system.
9. Negative battery cable.