Skylark V6-3100 3.1L VIN M SFI (1996)
8. Using a suitable tool, pry out the front cover oil seal.
ASSEMBLE
1. Install the front cover oil seal using the Oil Seal Installer.
2. Install the crankshaft position sensor.
3. Install the crankshaft position sensor screws. Tighten the crankshaft position sensor screws to 10 Nm (89 inch lbs.).
4. Install the water pump gasket.
5. Install the water pump.
6. Install the water pump bolts. Tighten the water pump bolts to 10 Nm (89 inch lbs.).
7. Install the water pump pulley.
8. Install the water pump pulley bolts. Tighten the water pump pulley bolts to 25 Nm (18 ft. lbs.).
