Skylark V6-3100 3.1L VIN M SFI (1996)
3. Remove exhaust crossover heat shield.
4. Remove crossover at exhaust manifold.
5. Remove heated oxygen sensor.
6. Disconnect EGR pipe at exhaust manifold.
7. Raise and support vehicle.
8. Remove transaxle oil fill tube and level indicator assembly.
9. Remove exhaust pipe from exhaust manifold.
10. Disconnect exhaust pipe from converter flange, and support converter.
11. Remove converter heat shield from body.
12. Remove exhaust manifold heat shield.
13. Remove exhaust manifold mounting nuts, Fig.4, then pull exhaust manifold from bottom of vehicle