Skylark V6-3100 3.1L VIN M SFI (1996)
Accelerator Pedal: Service and Repair
Accelerator Pedal Assembly
Accelerator Cable And Pedal
REMOVE OR DISCONNECT
1. Remove the left instrument panel sound insulator.
2. Remove the accelerator cable from accelerator pedal.
3. Remove the accelerator pedal nuts to cowl.
4. Remove the accelerator pedal assembly.
INSTALL OR CONNECT
1. Install the accelerator pedal assembly.
2. Install the accelerator pedal nuts to cowl.
3. Install the accelerator cable to the accelerator pedal
4. Install the left instrument panel sound insulator.
5. Inspect and check for complete throttle opening and closing positions by operating the accelerator pedal. Also check for poor carpet fit under the
accelerator pedal.
6. Inspect the throttle should operate freely without binding between full closed and wide open throttle.