Skylark V6-3100 3.1L VIN M SFI (1996)
Accelerator Pedal: Service and Repair
Accelerator Control Cable Replacement
Accelerator Cable Bracket Installation
REMOVE OR DISCONNECT
1. Remove the left instrument panel sound insulator.
2. Remove the accelerator cable from the accelerator pedal.
3. Squeeze the accelerator cable cover tangs and push the accelerator cable through the bulkhead.
4. Remove the accelerator cable shield, if equipped.
5. Remove the accelerator cable from the retaining clip.
6. Remove the accelerator cable from the throttle body lever.
7. Remove the accelerator cable from the accelerator cable bracket.