Skylark V6-3100 3.1L VIN M SFI (1996)
Ball Joint: Service and Repair
Fig. 3 Modified Outer Seal Protector.
Fig. 9 Lower Ball Joint To Lower Control Arm Assembly
1. Raise and support vehicle.
2. Remove tire and wheel assembly, then install modified outer seal protector No. J34754, or equivalent, Fig.3 .
3. Remove lower ball joint cotter pin and nut, then loosen ball joint from steering knuckle using tool No. J-29330, or equivalent.
4. Position a suitable pry bar between suspension support and lower control arm and separate lower ball joint from steering knuckle. On some
