Skylark V6-3100 3.1L VIN M SFI (1996)
2.
Remove the transmission from the vehicle. Refer to the appropriate SI document.
Important:
^
Inspect all the transmission components for damage or wear. Replace all damaged or worn components. The parts shown above should be
sufficient to correct this concern.
^
This condition does not normally require replacement of the transmission completely. Components such as clutches, valve body, pump and
torque converters will NOT require replacement to correct this condition.
Disassemble the transmission and replace the appropriate parts listed below. Refer to the Unit Repair Manual - Repair Instructions.
3.
Reinstall the transmission in the vehicle. Refer to appropriate service information.
When servicing the transmission as a result of this condition, the transmission oil cooler and lines MUST be flushed. Refer to Corporate Bulletin
Number 02-07-30-052.
