Skylark V6-3100 3.1L VIN M SFI (1996)
Fluid - M/T: Service and Repair
FLUID LEVEL
INSPECT
^
Fluid level only when the engine is "OFF", the vehicle is level and the transaxle is cold. To check the fluid level, remove and read the fluid level
indicator. If it indicates "Add" or below, use synchromesh transaxle fluid GM P/N 12345349 or equivalent lubricant to fill transaxle to the "Full"
level.
IMPORTANT: The fluid level indicator must be fully seated during vehicle operation or leakage will occur at the vent plug.
