Terraza FWD V6-3.5L VIN L (2006)
7. Reposition the heater hoses in order to access the thermal expansion valve (TXV).
8. Remove the evaporator inlet/outlet tube block nut at the TXV.
9. Remove the evaporator inlet/outlet tube block from the TXV.
10. Remove and discard the sealing washers.
11. Cap or tape the TXV openings.
12. Remove the evaporator inlet tube to condenser bolt (2).
13. Remove the evaporator inlet tube (5) from the condenser.
14. Remove and discard the sealing washer.
15. Cap or tape the condenser opening.
16. Remove the electrical connector (3) from bracket.
17. Remove the evaporator inlet/outlet tube bracket bolt (4).
18. Remove the evaporator inlet/outlet tube clip to shock tower nut (6).
19. Remove the evaporator inlet/outlet tube assembly.
20. Remove the evaporator outlet tube (8) from the inlet tube (5).
INSTALLATION PROCEDURE