Catera V6-3.0L VIN R (1997)
7. Install the spark plug boots to the spark plugs and reinstall the tool to the boots (1).
8. Position the wiring harness channel and install the bolts (1). Tighten the wiring harness channel bolts to 8 Nm (71 inch lbs.).
9. Connect the CMP electrical connection and secure the wire with a plastic tie.
10. Install the oil filler spout (1) by twisting clockwise and snapping in place.
11. Install the intake manifold.
12. Install the intake plenum. See Powertrain Management.
13. Reconnect the negative battery cable.
14. Reprogram the applicable accessories.