Catera V6-3.0L VIN R (1997)
Fog/Driving Lamp: Service and Repair
Fog Lamp Aiming
The fog lamp horizontal aim is not adjustable on this vehicle. An adjusting screw located at the bottom of the fog lamp is available to adjust the vertical
aim. Perform the following steps to adjust the vertical fog lamp aim:
1. Prepare the vehicle. Refer to the Headlamp Aiming Procedure.See: Headlamp/Service and Repair
2. Park the vehicle on a level surface 7.6 m (25 ft) away from the target screen.
3. Measure the center of the fog lamp to the ground line.
4. Turn the fog lamp on.
5. Ensure the top of the fog lamp beam is on the target screen 102 mm (4 in) below center of the fog lamp lens height.
6. Use the adjusting screw located at the bottom of the fog lamp to adjust the fog lamp as necessary.