cadillac Workshop Repair Guides

Cadillac Workshop Service and Repair Manuals

01-07-30-001|Page 5407 > < 01-07-30-001|Page 5404
Page 1
background image

Control Module: All Technical Service Bulletins
A/T - 4L30E Cold Shift Pattern

File In Section: 07 - Transmission/Transaxle 

Bulletin No.: 01-07-30-001

Date: January, 2001

INFORMATION

Subject: 
Cold Shift Pattern (Normal Condition)

Models: 
1997-2001 Cadillac Catera 
with Hydra-matic 4L30-E (RPO ML4)

Some owners of the above vehicles may comment on increased or higher engine speeds when the vehicle is driven immediately from a cold start. The
Transmission Control Module (TCM) software contains a function that modifies shift speed speeds when the engine is cold. When activated, this feature
will delay the shifts 10 to 15 km/h (6 to 9 mph), depending on the throttle angle.

The cold shift pattern enables if all of the following conditions exist:

^

The engine has been running for 5 seconds.

^

The engine temperature is between 40°C and +30°C (-40°F and +86°F).

^

Vehicle speed is 0 km/h (0 mph).

The cold shift pattern is disabled under any of the following conditions:

^

60 seconds after activation.

^

If throttle angle exceeds 60.5 percent.

^

Vehicle speed exceeds 50 km/h (30 mph). 

This is a normal condition, no repair should be attempted.

Disclaimer

01-07-30-001|Page 5407 > < 01-07-30-001|Page 5404