Cimarron V6-173 2.8L (1986)
Control Assembly: Technical Service Bulletins
A/C - Control Head Replacement Procedure
Bulletin No.
T-88-144
File in Group
1
Number
52
Corp. Ref. No.
811208
Date
June '88
SUBJECT:
A/C CONTROL HEAD REPLACEMENT PROCEDURE
MODELS AFFECTED: 1983-1984 CIMARRONS EQUIPPED WITH 2.0L L-4 ENGINES 1985-1986 CIMARRONS EQUIPPED WITH 2.8L V-6 ENGINES
When replacing the A/C control head on 1983-1984 Cimarrons equipped with 2.0L L-4 engines and 1985-1986 Cimarrons equipped with 2.8L V-6
engines, use the following procedure. This is to prevent multiple A/C control head electrical failures due to excessive current draw by the compressor
clutch causing internal circuitry damage to the A/C control head.
1.
Disconnect negative battery cable.
2.
Remove two screws securing A/C cutout relay (located behind R.H. shock tower).
3.
Disconnect relay connector.
FIGURE 1 - 1983-1984 CIRCUIT DIAGRAM