CTS V6-2.8L (2006)
NOTE: Refer to Fastener Notice in Service Precautions.
29. Install the assist handle bezel covers.
30. Install the fastener (3) for the rear dome lamp (1).
Tighten the fastener to 10 N.m (88 lb in).
31. Secure the bezel cover (2).
32. Secure both sunshades.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the outer sunshade bezel fasteners to 2 N.m (18 lb in).
33. Secure the right side sunshade rod retainer.
Tighten the right side to 10 N.m (88 lb in).
34. Secure the left side sunshade rod retainer.
Tighten the left side to 2 N.m (18 lb in).
35. Position the sunshades to the headliner.
36. Connect the electrical connectors to the inside rearview mirror.
37. Connect the connector lead (3) for the antenna module to the front windshield (2).
38. Connect the connector lead (3) for the antenna module to the rear window (1).