CTS V6-2.8L (2006)
7. Remove the park brake cable (1) from the park brake pedal release lever (2).
8. Remove the park brake release cable from the vehicle.
Installation Procedure
1. Install the park brake release cable to the vehicle.
2. Install the park brake cable (1) to the park brake pedal release lever (2).
3. Install the park brake release cable housing (2) to the park brake pedal assembly (1).
4. Install the park brake release cable (2) to the park brake release handle assembly (1).
5. Install the park brake release cable housing (3) to the park brake release handle assembly (1).
6. Install the park brake release handle assembly (1) to the knee bolster.
7. Install the park brake release handle mounting screws.
Tighten the park brake release handle mounting screws to 2 Nm (18 inch lbs.).
Notice: Refer to Fastener Notice in Service Precautions.
8. Install the knee bolster.