CTS V6-2.8L (2006)
and to the air bag sensor wiring harness (2).
26.
Install the condenser closeout panel.
27.
Remove the cover (1) from the underhood electrical center.
28.
Remove the nut securing the positive battery cable to the electrical center.
29.
Remove the positive battery cable and pass-thru grommet (3) from the electrical center.
30.
Disconnect both body wire harness connectors from the electrical center.
31.
Remove the body wire harness and pass-thru grommet (2) from the electrical center.
32.
Disconnect the engine wire harness connector (1) from the electrical center.
33.
Remove the engine wire harness and pass-thru grommet from the electrical center.