CTS V6-2.8L (2006)
6. Push the passenger side air inlet screen panel (3) towards the rear of the vehicle until the clips engage the windshield.
7. Align the center seam of the passenger side panel to the driver side panel.
8. Install the air inlet screen panel screen bolts (1).
Tighten the bolts to 10 N.m (89 lb in).
9. Install the hood seal to the panel.
10. Position the engine cover/sight shield over the intake manifold so the grommets are aligned with the ball studs.
11. Press the engine cover/sight shield down firmly near the ball studs in order to install the engine cover/sight shield.
12. Install the oil fill cap.
13. Install the cross car brace, if necessary.
