CTS V6-2.8L (2006)
Air Door Actuator / Motor: Service and Repair
Air Temperature Actuator - Right (RHD)
AIR TEMPERATURE ACTUATOR REPLACEMENT - RIGHT (RHD)
REMOVAL PROCEDURE
1. Remove the park brake pedal assembly.
2. Remove the screws (1) that retain the actuator (2).
3. Remove the right air temperature actuator.
4. Disconnect the electrical connector from the actuator.
INSTALLATION PROCEDURE
1. Connect the electrical connector to actuator.
2. Install the right air temperature actuator.
3. Install the screws (1) that retain the right air temperature actuator (2).
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the screws to 1 N.m (9 lb in).
4. Install the park brake pedal assembly