CTS V6-2.8L (2006)
Blower Motor: Service and Repair
Blower Motor (LHD)
BLOWER MOTOR REPLACEMENT (LHD)
REMOVAL PROCEDURE
1. Remove the right closeout insulator panel.
2. Remove the IP compartment.
3. Disconnect the blower motor electrical connector.
4. Disconnect the blower motor processor electrical connector.
5. Remove the screws (1) that retain the blower motor.
6. Remove the air inlet housing bolts to gain clearence for the blower motor.
7. Remove the blower motor.
INSTALLATION PROCEDURE
