CTS V6-2.8L (2006)
Condenser HVAC: Service and Repair
Condenser Replacement (CZ3)
CONDENSER REPLACEMENT (CZ3)
TOOLS REQUIRED
J 39400-A Halogen Leak Detector
REMOVAL PROCEDURE
1. Recover the refrigerant. Refer to Refrigerant Recovery and Recharging.
2. Remove the radiator support brackets.
3. Remove the upper condenser mounting bolts.
4. Remove the auxiliary cooling fan.
5. Remove the liquid line bolt (1) at the condenser
6. Pull the line straight out to protect the O-ring.
7. Disconnect the discharge hose (1) at the condenser.
8. Pull the line straight out to protect the O-ring.
9. Remove the condenser.
INSTALLATION PROCEDURE
1. Add refrigerant oil. Refer to Refrigerant System Capacities.
2. Install the condenser.
3. Install the auxiliary cooling fan.
4. Lube O-ring with refrigerant oil before installing. Refer to O-Ring Replacement.
