CTS V6-2.8L (2006)
![background image](/cadillac/cts/v6-2.8l/Page-2618001.png)
Control Assembly: Service and Repair
HVAC CONTROL MODULE REPLACEMENT
REMOVAL PROCEDURE
1. Remove the screw behind the ashtray.
2. Remove the HVAC control module trim plate by pulling outward on right and left side.
3. Disconnect the HVAC control module electrical connector.
4. Disconnect the ash tray electrical connector.
5. Remove the HVAC control module screws (1).
6. Remove the HVAC control module.
INSTALLATION PROCEDURE
1. Install the HVAC control module into the trim plate.
2. Install the HVAC control module screws (1).
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the screws to 2 N.m (18 lb in).