CTS V6-2.8L (2006)
9. Lift the fascia upward in order to insert the fascia studs into the fender key slots.
10. Slide the fascia rearward to attach the fascia to the fender.
11. Install the bolt (1, 2) to secure the fascia to the fender.
Tighten the bolts to 9 N.m (80 lb in).
12. Install the front fascia extension to the vehicle.
13. Install the push-pin retainers to secure the upper portion of the front fascia and grille to the upper tie bar.
14. Close the hood.
15. Raise and support vehicle. Refer to Vehicle Lifting.
16. Position the air deflector to the vehicle.
17. Install the push-pin retainers to secure the air deflector to the vehicle.
18. Lower the vehicle.
