CTS V6-2.8L (2006)
Seals and Gaskets: Service and Repair
Tremec 6-Speed - Manual Transmission
Mainshaft Rear Oil Seal Replacement
Tools Required
^
J6125-1B Slide Hammer
^
J23129 Universal Seal Remover
^
J29873 Injector Nozzle Socket 30 mm
^
J44765 Seal Installer
^
J45012 Holding Fixture
^
J45019 Flange and Pinion Gage Remover
Removal Procedure
1. Place the transmission in neutral.
2. Raise and support the vehicle. Refer to Vehicle Lifting.
3. Remove the propeller shaft (6).
4. Install the J45012 to the drive flange.
5. While holding the J45012, remove the flange nut using the J29873.
6. Remove the J45012.
