CTS V6-3.2L VIN N (2003)
Front Bumper Cover / Fascia: Service and Repair
Fascia Replacement - Front Bumper
Fascia Replacement - Front Bumper
Removal Procedure
1. Raise and support the vehicle. Refer toLifting and Jacking the Vehicle in General Information.
2. Remove the front fascia extensions. Refer toFascia Extension Replacement - Front (See: Fascia Extension Replacement - Front) .
3. Remove the condenser seal (1) by carefully pulling up.
4. Remove the front push-in fasteners that secure the air deflector to the fascia.
5. Disconnect the left and the right side marker lamp electrical connectors.
6. Disconnect the fog lamp electrical connectors (1,2).
7. Remove the bolts (2) that secure the bumper fascia to the front fender.
8. Remove the push-in retainers (1) across the top side of the fascia.