CTS V6-3.2L VIN N (2003)
Important: The arrow on the energy absorber (1) needs to be positioned upward prior to installation.
1. Install the energy absorber (1) to the frame rail (3).
2. Position the diagonal brace (1) to the hood latch bracket assembly, and to the stud on the backside of the energy absorber.
Notice: Refer toFastener Notice in Cautions and Notices.
3. Install the energy absorber nuts (2).
Tighten the nuts to 25 Nm (18 lb ft).
4. Install the front impact bar. Refer toImpact Bar Replacement - Front Bumper (See: Front Bumper Reinforcement/Service and Repair) .