CTS V6-3.2L VIN N (2003)
Console: Service and Repair
Center Console End Panel Replacement
Center Console End Panel Replacement
Removal Procedure
1. Remove the ash tray.
2. Push up on the retaining tabs (1) locking the rear panel to the console.
3. Release the tabs (1) on the side of the rear panel
4. Disconnect the power outlet electrical connector (1).
5. Remove the rear panel assembly.
Installation Procedure
1. Connect the electrical connector (1) to the power outlet.
2. Lock the tabs (1) on the rear panel assembly to the console .
3. Install the ash tray assembly.
