CTS V6-3.2L VIN N (2003)
Head Rest: Removal and Replacement
Head Restraint Retainer Replacement - Rear Seat
Head Restraint Retainer Replacement - Rear Seat
Removal Procedure
1. Remove the rear seat back. Refer toSeat Back Replacement - Rear (See: Seat Back/Service and Repair/Removal and Replacement/Seat Back
Replacement - Rear) .
2. Remove the head restraint. Refer toHead Restraint Replacement - Rear Seat (See: Head Restraint Replacement - Rear Seat) .
3. Release the J channel (1) at the base of the seat back.
4. Reach up under the seat back and pinch the base of the head restraint retainer (1) to release it.
5. Remove the retainers.
Installation Procedure
1. Fasten the J channel (1) on the seat back.
2. Push the head rest retainers into the seat back until they lock into place.
3. Install the rear seat back. Refer toSeat Back Replacement - Rear (See: Seat Back/Service and Repair/Removal and Replacement/Seat Back
Replacement - Rear) .
4. Install the head restraint. Refer toHead Restraint Replacement - Rear Seat (See: Head Restraint Replacement - Rear Seat) .