CTS V6-3.2L VIN N (2003)
Power Seat Motor Position Sensor: Service and Repair
Sensor Replacement - Seat Adjuster Motor - Vertical
SENSOR REPLACEMENT - SEAT ADJUSTER MOTOR - VERTICAL
REMOVAL PROCEDURE
1. Disable the SIR system.
CAUTION: Refer to SIR Caution in Service Precautions.
2. Remove the seat.
3. Disconnect the electrical connector from the seat adjuster motor sensor (3).
4. Release the tabs and remove the sensor.
INSTALLATION PROCEDURE
1. Install the seat adjuster motor sensor to the motor.
2. Connect the electrical connector to the sensor (3).
3. Install the seat.
4. Enable the SIR system.