CTS V6-3.2L VIN N (2003)
Harmonic Balancer - Crankshaft Pulley: Service and Repair
Crankshaft Balancer Replacement
Crankshaft Balancer Replacement
Removal Procedure
1. Remove the intake air resonator.
2. Remove the drive belt.
3. Remove the crankshaft balancer bolts.
4. Remove the crankshaft balancer from the crankshaft sprocket.
Installation Procedure
1. Install the crankshaft balancer to the crankshaft sprocket.
Notice:
Refer to Fastener Notice in Service Precautions.
See: Service Precautions/Vehicle Damage Warnings/Fastener Notice
2. Install the crankshaft balancer bolts.
Tighten the crankshaft balancer bolts to 20 Nm (15 ft. lbs.).
3. Install the drive belt.
4. Remove the intake air resonator.