CTS V6-3.2L VIN N (2003)
9. Install the 2 nuts securing the exhaust pipe to the right catalytic converter.
Tighten the catalytic converter nuts to 15 Nm (11 ft lbs.).
10. Install the heated oxygen sensor if previously removed.
11. Connect the Heated oxygen sensor at the sensor pigtail.
12. Lower the vehicle.
Right
Catalytic Converter Replacement - Right
Removal Procedure
Caution:
Refer to Exhaust Service Caution in Service Precautions.
See: Powertrain Management/Emission Control Systems/Service Precautions/Vehicle Damage Warnings/Exhaust System Inspection
Notice
Caution:
Refer to Protective Goggles and Glove Caution in Service Precautions.
See: Powertrain Management/Emission Control Systems/Service Precautions/Technician Safety Information
1. Raise and support the vehicle. Refer to Vehicle Lifting.
See: Maintenance/Vehicle Lifting
