CTS V6-3.2L VIN N (2003)
Air Door Actuator / Motor: Service and Repair
Recirculation Actuator Replacement (Lhd)
RECIRCULATION ACTUATOR REPLACEMENT (LHD)
REMOVAL PROCEDURE
1. Remove the air inlet assembly.
2. Disconnect the electrical connector from the recirculation actuator.
3. Remove the recirculation actuator screws (1).
4. Remove the recirculation actuator.
INSTALLATION PROCEDURE
1. Install the recirculation actuator.
2. Install the recirculation actuator screws (1).
NOTE: Refer to Fastener Notice
Tighten
