CTS V6-3.2L VIN N (2003)
1. Install J 45845 to the lower control arm and the frame.
2. Loosen the lower control arm to frame bolt.
Notice: Refer to Fastener Notice in Service Precaution.
3. Adjust the camber angle by turning the turnbuckle on J 45845 until the specifications have been met.
^
Tighten the bolt to 150 Nm (111 ft. lbs.).
4. Verify that the camber is still with specifications.
5. Adjust the rear toe.
Rear Toe Adjustment
Important: Complete the left and right rear toe adjustments separately, per wheel. Using the following procedure.
1. Loosen the adjustment link jam nuts (1).
Notice: Refer to Fastener Notice in Service Precaution.
2. In order to adjust the toe, rotate the turnbuckle (2).
^
Tighten the jam nuts to 75 Nm (55 ft. lbs.).
3. Recheck the toe setting after tightening.
4. Readjust the toe setting if necessary.
