CTS V6-3.2L VIN N (2003)
10. Remove the passenger/right sound insulator from the instrument Panel (I/P) (3).
11. Remove the CPA from the I/P module yellow connector (1).
12. Disconnect the I/P module yellow connector (1) from the vehicle harness yellow connector (2).
13. Remove both CPA locks from the passenger/RF side impact module and seat belt pretensioner yellow connector (1) located under the front of
passenger seat.
14. Disconnect the RF side impact module and pretensioner yellow connector from the vehicle harness yellow connector (1).
15. Remove the driver/left sound insulator from the instrument Panel (IP) (2).
16. Remove the CPA from the steering wheel module coil yellow connector (1).
17. Disconnect the steering wheel module coil yellow connector (1) from the vehicle harness yellow connector (3).