CTS V6-3.2L VIN N (2003)
Knee Diverter: Service and Repair
Knee Bolster Replacement - Left
KNEE BOLSTER BRACKET REPLACEMENT - LEFT
REMOVAL PROCEDURE
1. Remove the knee bolster trim.
2. Remove the screws (2) securing the knee bolster bracket to the I/P.
3. Remove the knee bolster bracket.
INSTALLATION PROCEDURE
1. Align the tabs (1) to the I/P carrier in order to install the knee bolster bracket.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the screws (2) securing the knee bolster bracket to the I/P.
Tighten
Tighten the fasteners to 9 N.m (80 lb in).
3. Install the knee bolster trim.