CTS V6-3.2L VIN N (2003)
Air Bag(s) Arming and Disarming: Service and Repair
Zone 1
1. Turn the steering wheel so that the vehicle's wheels are pointing straight ahead.
2. Turn the ignition switch to the OFF position.
3. Remove the key from the ignition switch.
4. Remove the rear seat.
5. Locate the right rear fuse center (1) under rear seat, then remove the fuse center top cover.
6. Locate and remove the SIR fuse from the right rear fuse center.
IMPORTANT: With the SIR fuse removed and the ignition switch in the ON position, the AIR BAG warning indicator illuminates. This is normal
operation, and does not indicate an SIR system malfunction.
7. Open front hood, and locate the front end sensor also known as the electronic frontal sensor (EFS) (2).
8. Remove the connector position assurance (CPA) from the EFS connector.
9. Remove the EFS connector from the EFS (2).