CTS V6-3.2L VIN N (2003)
1. Install the rear shoulder belt retractor (1). Engage the tab on the retractor (1).
2. Install the seat belt retractor fastener (2).
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the rear seat retractor fastener to 30 N.m (22 lb ft).
3. Route the shoulder belt through the sail panel and verify that it is not twisted.
4. Install the shoulder belt fastener.
Tighten
Tighten the shoulder bolt fastener to 30 N.m (22 lb ft).
5. Install the sail panel.
6. Install the rear trim shelf panel.
7. Install the rear seat back.
8. Install the rear seat cushion.