CTS V6-3.2L VIN N (2003)
Ambient Temperature Sensor / Switch HVAC: Service and Repair
Inside Air Temperature Sensor Replacement
INSIDE AIR TEMPERATURE SENSOR REPLACEMENT
REMOVAL PROCEDURE
1. Remove the inside air temperature assembly by prying outward.
2. Disconnect the inside air temperature assembly electrical connection (1).
3. Disconnect the inside air temperature assembly tube (3).
4. Remove the inside air temperature assembly (2).
INSTALLATION PROCEDURE
1. Connect the inside air temperature assembly electrical connector (1).
2. Connect the inside air temperature assembly tube (3).
3. Confirm that the foam seal tape is in place and covering the openings on the sides of the grille assembly (2).
4. Press the inside air temperature assembly (2) into the I/P.
