CTS V6-3.2L VIN N (2003)
Important: Loosely install the return hose and retainers before tightening.
1. Install the power steering return hose to the vehicle.
2. Install the power steering return hose to the power steering gear.
3. Install the power steering return hose to the power steering cooler.
Notice: Refer to Fastener Notice in Service Precaution.
4. Install the power steering return to power steering gear retaining bolt.
^
Tighten the hose to gear bolt to 9 Nm (80 inch lbs.).
^
Tighten the hose to gear fitting 30 Nm (22 inch lbs.).
5. Install the front air deflector.
6. Lower the vehicle.
7. Install the air cleaner assembly.
8. Remove the drain pan from under the vehicle.
9. Bleed the power steering system.