CTS V6-3.2L VIN N (2003)
Important: Note the relationship of the upper intermediate shaft to the lower intermediate shaft and the upper intermediate shaft to the steering
column in order to ensure proper instillation.
9. Remove the upper intermediate shaft to the steering column retaining bolt.
10. Remove the upper intermediate shaft from the steering column.
Installation Procedure
1. Install the upper intermediate shaft to the steering column.
Notice: Refer to Fastener Notice in Service Precaution.
2. Install the upper intermediate shaft to the steering column retaining bolt.
^
Tighten the upper intermediate shaft to the steering column retaining bolt to 48 Nm (35 ft. lbs.).
3. Install the steering column.
4. Raise the vehicle. Refer to Vehicle Lifting.
5. Install the upper intermediate shaft to the lower intermediate shaft.
