CTS V6-3.2L VIN N (2003)
Suspension Control Module: Service and Repair
Shock Module Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and wheel.
3. Remove the upper control arm to steering knuckle pinch bolt and nut.
4. Disconnect the upper ball joint from the steering knuckle.
5. Remove the shock module lower mounting bolts (1).
6. Lower the vehicle.
7. Remove the air conditioning line retaining nut from the shock tower.
8. Position the air conditioning line bracket a side.