CTS V6-3.2L VIN N (2003)
5. Install a suitable jack under the lower control arm.
6. Using the jack raise the lower control arm until the shock absorber aligns with the knuckle.
7. Install the shock absorber lower retaining bolt.
^
Tighten the bolt to 150 Nm (111 ft. lbs.).
8. Remove the jack from the vehicle.
9. Install the brake pipe bracket (2) to the mounting studs (1).
10. Install the brake pipe bracket retaining nuts.
^
Tighten the nuts to 10 Nm (89 inch lbs.).
11. Install the tire and wheel.
12. Lower the vehicle.
