CTS V6-3.2L VIN N (2003)
7. Remove the parking brake cable bracket mounting bolts from the knuckle.
8. Remove the parking brake cable bracket from the knuckle.
9. Install J 42129 to the wheel bearing/hub.
10. Using J 42129 disengage the wheel drive shaft from the wheel bearing/hub.
11. Remove the wheel bearing/hub mounting bolts.
Important: May need to use the wheel hub remover to fully disengage the wheel bearing/hub from the drive axle.
12. Remove the wheel bearing/hub and backing plate from the knuckle.
13. Remove J 42129 from the wheel bearing/hub.
Installation Procedure